Local Sale! πŸŽ‰ Save 10% on in-store purchases! 🏷️ Pickup Only Select 'Local Pick-Up' at checkout.πŸ›’ Dismiss

Have you been steered away from a rattle-can paint job? While most people claim that spray-can paint jobs create an inferior finish and don’t stand the test of time, the truth is more complicated than that. While automotive spray paint isn’t ideal for all situations, it can be a simple and cost-effective option for more minor and less complex repairs, like repainting your motorcycle! Keep reading to learn why motorcyclists choose rattle cans from Central Alberta Paint and Supplies to refurbish their ride.

4 Expert Tips for a Perfect Automotive Spray Paint Job

The Importance of Proper Prep

Experts tell you that prep work can make or break your paint job. When you don’t effectively clean, prep, and prime your work surface, your spray can paint job will turn out dull, patchy, and very underwhelming. But with effective sanding and all-star wax and grease remover, you can achieve a professional finish at a fraction of the cost. Remember to protect your work area by creating a paint tent and investing in proper personal protective equipment.

Practice Makes Perfect

​​Getting the hang of spray patterns and techniques can be tough. Before spraying, practice the motions on a scrap piece of plywood or cardboard. This way, you can adjust your technique and catch any problems before the paint hits your motorcycle.

Try a Paint Pen

Do you only need to touch up a small scratch? Try using an automotive paint pen! These handy tools have both colour and clear coat applicators. Shake vigorously for a full minute before using, then tap the tip lightly until paint flows. Apply in thin layers with a dabbing motion rather than dragging across the surface for best results.

Polish, Polish, Polish

The secret to making your rattle can job shine? A little bit (or a lot!) of elbow grease. Some CAPS customers report spending up to five hours polishing their new paint. Wet sanding with increasingly fine grits, followed by polishing compound, will transform a dull finish into a mirror-like shine. Work slowly and carefullyβ€”you don’t want to burn through your clear coat after all that hard work!

Step-by-Step Guide to Using Automotive Spray Paint on Your Motorcycle

Ready to try using automotive spray paint on your motorcycle? Let us walk you through the process:

Preparation

  1. Disassemble parts: Carefully remove any items you plan on painting, including fairings, tanks, and trim. This helps prevent overspray on other areas of your bike.
  2. Clean thoroughly: Use a degreaser or soapy water to expertly remove any dust, dirt, or grime that could interfere with your paint job.
  3. Sand surfaces: Use 600-grit sandpaper to create a smooth, uniform texture for ideal paint adhesion.

Priming

Apply 2-3 thin coats of primer, waiting 10 minutes between layers. Sand lightly after drying to eliminate bumps.

Painting

Shake the can vigorously, then hold it 8-12 inches from the surface. Use steady, overlapping strokes to avoid drips.

Clear Coat

After the final base colour coat dries, apply 3-4 2K clear coat layers. This glossy shield protects against UV rays, scratches, and fuel spills.

Everything You Need at Central Alberta Paint and Supplies

At Central Alberta Paint & Supplies, we stock everything you need: primers, colour-matched paints, Spraymax 2K clear coats, and more! Visit our Red Deer or Edmonton stores, or shop online for Canada-wide delivery. With the right tools and techniques, your DIY paint job will turn heads on the road for years. Get started with our team today!

0